E
.
Learndmv
DMV PRACTICE
Toggle navigation
Find your state
Exam types
Practice tests
Sign in
Create account
↗
← Leave quiz
Arkansas CDL Air Brakes Test Practice Questions - Arkansas Commercial Driver License (CDL) Air Brakes Knowledge Test Exam
Practice mode
Question
1
of 25
QUESTION 1 / 25
What component compresses air for the air brake system?
Choose one answer below.
A
The air dryer
✓
B
The air compressor
✓
C
The brake chamber
✓
D
The slack adjuster
✓
QUESTION 2 / 25
What is the typical air compressor governor cut-out pressure range?
Choose one answer below.
A
60 to 80 psi
✓
B
100 to 125 psi
✓
C
125 to 140 psi
✓
D
150 to 175 psi
✓
QUESTION 3 / 25
At what pressure does the air compressor governor typically cut IN to resume pumping?
Choose one answer below.
A
60 to 80 psi
✓
B
100 to 125 psi
✓
C
125 to 140 psi
✓
D
145 to 150 psi
✓
QUESTION 4 / 25
What is the purpose of the air dryer in the brake system?
Choose one answer below.
A
To cool the air before storage
✓
B
To remove moisture and oil before air reaches the tanks
✓
C
To increase compressed air pressure
✓
D
To warn the driver of low pressure
✓
QUESTION 5 / 25
What is the function of the wet tank (supply or service reservoir)?
Choose one answer below.
A
It cools brake fluid
✓
B
It is the first storage tank where moisture collects before air moves to the other tanks
✓
C
It supplies air only to the trailer
✓
D
It activates the parking brakes
✓
QUESTION 6 / 25
At what pressure does the safety valve in the supply tank typically open to release excess air?
Choose one answer below.
A
100 psi
✓
B
125 psi
✓
C
150 psi
✓
D
200 psi
✓
QUESTION 7 / 25
What is the role of the foot valve (also called the treadle or service brake valve)?
Choose one answer below.
A
It locks the parking brake
✓
B
It supplies air to the brake chambers in proportion to how hard the driver presses the pedal
✓
C
It drains water from the tanks
✓
D
It controls the trailer air supply
✓
QUESTION 8 / 25
What does the brake chamber do?
Choose one answer below.
A
Stores compressed air for emergencies
✓
B
Converts air pressure into mechanical force through a pushrod
✓
C
Cools brake drums during use
✓
D
Acts as a backup for the parking brake
✓
QUESTION 9 / 25
What is the role of the slack adjuster on an S-cam brake?
Choose one answer below.
A
It cushions the impact of hard braking
✓
B
It transfers force from the pushrod to the S-cam and can be adjusted to compensate for lining wear
✓
C
It bleeds water from the system
✓
D
It limits maximum air pressure
✓
QUESTION 10 / 25
What does the S-cam do in an S-cam drum brake?
Choose one answer below.
A
It releases air from the lines
✓
B
It rotates between the brake shoes, forcing them outward against the drum
✓
C
It cools the brake drum
✓
D
It activates the low-pressure warning
✓
QUESTION 11 / 25
How are spring (parking) brakes held in the released position?
Choose one answer below.
A
By engine vacuum
✓
B
By a hydraulic line
✓
C
By air pressure applied against the spring
✓
D
By a mechanical lock that the driver releases
✓
QUESTION 12 / 25
On an Arkansas CDL air-brake vehicle inspection, what does the yellow diamond parking-brake control normally do?
Choose one answer below.
A
It drains the wet tank
✓
B
It applies and releases the parking spring brakes
✓
C
It controls only the trailer supply line
✓
D
It turns on the low-air warning buzzer
✓
QUESTION 13 / 25
On a tractor-trailer with air brakes, what does the red eight-sided trailer air-supply control do?
Choose one answer below.
A
It controls the tractor parking brakes only
✓
B
It supplies air to the trailer system when pushed in and exhausts trailer supply air when pulled out
✓
C
It adjusts the compressor governor
✓
D
It drains moisture from the trailer reservoir
✓
QUESTION 14 / 25
What is a dual air brake system?
Choose one answer below.
A
A system that uses two compressors
✓
B
A system with two completely separate air systems (primary and secondary), each controlling brakes on different axles
✓
C
A system that uses both air and hydraulic fluid
✓
D
A system with air-cooled drums
✓
QUESTION 15 / 25
At what pressure must the low air pressure warning device activate at the latest?
Choose one answer below.
A
At 30 psi
✓
B
At 60 psi or higher
✓
C
At 90 psi
✓
D
At 120 psi
✓
QUESTION 16 / 25
While driving, the low air pressure warning light comes on. What should you do?
Choose one answer below.
A
Continue to your destination but watch the gauge
✓
B
Bring the vehicle to a safe stop as soon as possible and find the problem
✓
C
Apply the parking brake while still moving
✓
D
Pump the brake pedal to build pressure
✓
QUESTION 17 / 25
How often should air tank drain valves be operated to remove water and oil?
Choose one answer below.
A
Once a year
✓
B
After every long trip only
✓
C
Daily
✓
D
Only when the warning light comes on
✓
QUESTION 18 / 25
What is the maximum allowable air loss rate for a single vehicle with the brakes released (static leak rate)?
Choose one answer below.
A
1 psi per minute
✓
B
2 psi per minute
✓
C
3 psi per minute
✓
D
4 psi per minute
✓
QUESTION 19 / 25
What is the maximum allowable air loss rate for a combination vehicle with the brakes released?
Choose one answer below.
A
1 psi per minute
✓
B
2 psi per minute
✓
C
3 psi per minute
✓
D
5 psi per minute
✓
QUESTION 20 / 25
What is the maximum allowable air loss rate for a single vehicle with the brakes APPLIED (applied leak rate)?
Choose one answer below.
A
2 psi per minute
✓
B
3 psi per minute
✓
C
4 psi per minute
✓
D
5 psi per minute
✓
QUESTION 21 / 25
What is the maximum allowable air loss rate for a combination vehicle with the brakes APPLIED?
Choose one answer below.
A
2 psi per minute
✓
B
3 psi per minute
✓
C
4 psi per minute
✓
D
6 psi per minute
✓
QUESTION 22 / 25
During the air brake pre-trip inspection, how do you test the low air pressure warning device?
Choose one answer below.
A
Start the engine and watch the gauge
✓
B
Build air pressure to governor cut-out, shut off the engine, turn the key to the on position, and fan the brakes until the warning activates
✓
C
Apply the parking brake and listen for the alarm
✓
D
Drain the wet tank only
✓
QUESTION 23 / 25
During the air brake pre-trip, how do you test that the spring brakes apply automatically?
Choose one answer below.
A
Apply the foot brake hard while driving
✓
B
Continue fanning the brakes until air pressure drops far enough; the spring brakes should apply between roughly 20 and 45 psi
✓
C
Pull the parking brake at 60 psi
✓
D
Drain the secondary tank only
✓
QUESTION 24 / 25
In normal stops with air brakes, you should:
Choose one answer below.
A
Stab the pedal hard, then release
✓
B
Apply the brakes firmly and steadily until you slow enough to safely shift to neutral or a lower gear
✓
C
Apply the parking brake
✓
D
Pump the pedal rapidly
✓
QUESTION 25 / 25
What is controlled braking in an emergency stop with air brakes?
Choose one answer below.
A
Pressing the pedal as hard as possible and holding it
✓
B
Applying the brakes as hard as you can without locking the wheels, then releasing slightly if wheels lock
✓
C
Using only the parking brake
✓
D
Pumping the pedal rapidly
✓
← Previous
0 of 25 answered
Next question →
Finish & see results →