E
.
Learndmv
DMV PRACTICE
Toggle navigation
Find your state
Exam types
Practice tests
Sign in
Create account
↗
← Leave quiz
Chatt-State CDL Class A Pre-Trip Inspection Practice Exam
Practice mode
Question
1
of 10
QUESTION 1 / 10
When inspecting the king pin apron and king pin, what must be ensured?
Choose one answer below.
A
Not BBC, no illegal welds, and no space between apron and skid plate
✓
B
Only visual inspection without details
✓
C
Loose connections are acceptable
✓
D
Visible wear is acceptable
✓
QUESTION 2 / 10
What is the purpose of the rubber straps under the metal straps on the fuel tank?
Choose one answer below.
A
To ensure they are strictly for show
✓
B
To keep the tank from rubbing and getting holes
✓
C
To allow the tank to move freely
✓
D
To prevent any securement
✓
QUESTION 3 / 10
What condition should the brake chamber and clamp be in?
Choose one answer below.
A
No rust and must be flexible
✓
B
Must not be cracked or broken
✓
C
Condition of paint is important
✓
D
Must be completely dry
✓
QUESTION 4 / 10
What should you tell the examiner after performing the brake tests?
Choose one answer below.
A
The tests are complete and pass
✓
B
The lights and buzzers are working properly
✓
C
Both valves did not pop out
✓
D
The air pressure is insufficient
✓
QUESTION 5 / 10
How should the air pressure be checked in the brake system?
Choose one answer below.
A
By using a pressure gauge to ensure it meets manufacturer specifications
✓
B
By visually checking the air hoses for leaks
✓
C
By listening for the sound of the compressor
✓
D
By gently pressing the brake pedal
✓
QUESTION 6 / 10
What should be assessed regarding the catwalk during the inspection?
Choose one answer below.
A
If it is flexible or rigid
✓
B
Its overall aesthetic appeal
✓
C
Whether it is cracked, broken, or secure
✓
D
If it is the correct color
✓
QUESTION 7 / 10
In checking the marker light by the driver door, what must be ensured?
Choose one answer below.
A
It can be a different color than required
✓
B
It is working and clean
✓
C
It should be dismantled for inspection
✓
D
It needs to be discolored for nighttime visibility
✓
QUESTION 8 / 10
What does PMS stand for in the context of vehicle inspections?
Choose one answer below.
A
Proper Maintenance Standards
✓
B
Pre-Maintenance Safety
✓
C
Preventative Maintenance System
✓
D
Pre-Trip Maintenance Safety
✓
QUESTION 9 / 10
What is the minimum tire pressure reading during an inspection?
Choose one answer below.
A
No less than 50 PSI
✓
B
No less than 75 PSI
✓
C
No less than 90 PSI
✓
D
No less than 100 PSI
✓
QUESTION 10 / 10
How do you check the fuel system for leaks?
Choose one answer below.
A
Look for wet spots underneath the tank and check for any cracks or fittings
✓
B
Inspect the fuel gauge for accuracy
✓
C
Ensure the fuel cap is secured tightly
✓
D
Check the fuel filter for blockages
✓
← Previous
0 of 10 answered
Next question →
Finish & see results →