E
.
Learndmv
DMV PRACTICE
Toggle navigation
Find your state
Exam types
Practice tests
Sign in
Create account
↗
← Leave quiz
QMS Roadway Practice Test
Practice mode
Question
1
of 10
QUESTION 1 / 10
When can the prime coat be applied?
Choose one answer below.
A
When atmospheric temperature is below 40 degrees Fahrenheit
✓
B
When the surface is wet
✓
C
When the atmospheric temperature is above 40 degrees Fahrenheit
✓
D
When moisture content is high
✓
QUESTION 2 / 10
What is necessary for the tack coat application to bond properly?
Choose one answer below.
A
It must be applied in wet conditions
✓
B
It must have a proper temperature
✓
C
It must be sprayed in multiple layers
✓
D
It must not be applied on hot surfaces
✓
QUESTION 3 / 10
What does the second number -22 in the PG standard 64-22 represent?
Choose one answer below.
A
High temperature
✓
B
Low temperature
✓
C
Average temperature
✓
D
Maximum density
✓
QUESTION 4 / 10
What is often a consequence of inadequate compaction in asphalt layers?
Choose one answer below.
A
Potholes.
✓
B
Cracks.
✓
C
Surface raveling.
✓
D
All of the above.
✓
QUESTION 5 / 10
What is the maximum speed limit for steel wheeled breakdown rollers during compaction?
Choose one answer below.
A
2 mph
✓
B
3 mph
✓
C
4 mph
✓
D
5 mph
✓
QUESTION 6 / 10
What is NOT an objective of priming a non-asphalt base?
Choose one answer below.
A
To seal voids
✓
B
To provide temporary covers
✓
C
To waterproof the surface
✓
D
To create a decorative finish
✓
QUESTION 7 / 10
In paving operations, what must be ensured about vehicles and equipment?
Choose one answer below.
A
They must all be new
✓
B
They must be available and operational
✓
C
They must be under 5 years old
✓
D
They must be fully inspected weekly
✓
QUESTION 8 / 10
Which grade of asphalt binder is noted for a temperature of 130-160F?
Choose one answer below.
A
Grade PG 58-28
✓
B
Grade CR-1
✓
C
Grade CRS-1H
✓
D
Grade HFMS-1
✓
QUESTION 9 / 10
In which phase does the initial densification of the asphalt occur?
Choose one answer below.
A
Breakdown phase.
✓
B
Intermediate phase.
✓
C
Finish phase.
✓
D
Final phase.
✓
QUESTION 10 / 10
How should the feed system be adjusted for optimal operation?
Choose one answer below.
A
To minimize conveyor usage
✓
B
To maintain a uniform head of material
✓
C
To maximize mixing speed
✓
D
To operate conveyors at less than 50% of the time
✓
← Previous
0 of 10 answered
Next question →
Finish & see results →